Parrot Cart pluginsGet a Parrot Cart

Empire Strikes Back

Emulator for the vector-based arcade sequel

The details page on the cartESB.CVP

On the TV

These are the author’s screenshots, shown pixel for pixel.

Empire Strikes Back on the TV, picture 1 of 2
Picture 1256 × 192
Empire Strikes Back on the TV, picture 2 of 2
Picture 2256 × 192

README on the cart

This is what the cart shows for this plugin. It’s 133 lines long and 30 characters wide.

On the cart’s details page2,812 bytes

Plain text

THE EMPIRE STRIKES BACK

This plugin plays Atari's 1985
The Empire Strikes Back arcade
game on the ColecoVision. It
needs your own copy of the
game's ROMs.

SETUP

1. Copy ESB.CVP into the
   /PLUGINS folder on the
   card.
2. Put the ROMs from MAME's
   esb set in a folder named
   /ESB. You can copy the 14
   files loose, or copy
   esb.zip as it is. You can
   also put the zip in the
   card's top folder as
   /ESB.ZIP.
3. Start Empire Strikes Back
   from the Plugins page in
   the menu.

The files can have any names,
because the plugin knows each
ROM by its size and contents.
If a ROM is missing, the
screen names it. Only MAME's
esb set works.

CONTROLS

On the ColecoVision
controller:

- The joystick moves the yoke.
  The yoke springs back when
  you let go.
- Either fire button fires.
- Keypad 1 adds a coin.
- Keypad 2 starts the game.
  Fire starts it too.
- Keypad 0 swaps up and down.
- Press RESET on the console
  to go back to the menu.

On a USB pad, through a
powered hub:

- The left stick moves the
  yoke. The D-pad works too.
- Any face button, L, R, ZL or
  ZR fires.
- Minus adds a coin, and plus
  starts the game.
- Click the right stick, or
  press the capture button, to
  swap up and down.

At first, up on the stick aims
down, the way a flight stick
works. The plugin remembers
which way you left it.

About five seconds after the
game starts, the stick does
nothing for three seconds. The
plugin is moving the yoke to
both ends so the game can
learn its range.

SAVES

High scores and the game's
settings are saved in
/ESB/ESB.NV when you press
RESET. Press RESET before you
turn the console off, or new
high scores are lost.

CREDITS

Parts of this plugin are ports
of MAME's code, or were
checked against it. That code
is under the BSD-3-Clause
license, and its authors are:

- Steve Baines and Frank
  Palazzolo, for the Star Wars
  driver and the matrix
  processor.
- Aaron Giles, for the
  slapstic chip.
- Mathis Rosenhauer, for the
  vector generator, with
  thanks to Eric Smith, Brad
  Oliver, Bernd Wiebelt, Aaron
  Giles and Andrew Caldwell.
- Frank Palazzolo, Aaron
  Giles, Jonathan Gevaryahu,
  Raphael Nabet, Couriersud
  and Michael Zapf, for the
  TMS5220 speech chip.
- Curt Coder, smf, Barry
  Rodewald and Dirk Best, for
  the RIOT, X2212 and ADC0809
  chips.
- Nathan Woods, for the 6809
  CPU.
- Brad Oliver, Eric Smith and
  Juergen Buchmueller, for the
  POKEY sound chip.

You can find MAME at
https://www.mamedev.org. The
zip reader follows Mark
Adler's puff, from zlib. USB
support comes from TinyUSB by
Ha Thach, under the MIT
license.

The plugin itself is by Parrot
Cart, and it's free. Its
source is linked next to its
download.

Star Wars and The Empire
Strikes Back are trademarks of
Lucasfilm Ltd. This plugin
contains none of the game.

cart-readme.txt

README

This is the README.md from release v0.1.4. Images show up as links.

The Empire Strikes Back

This plugin plays Atari’s 1985 The Empire Strikes Back arcade game on the ColecoVision. It needs your own copy of the game’s ROMs.

Setup

  1. Copy ESB.CVP into the /PLUGINS folder on the card.
  2. Put the ROMs from MAME’s esb set in a folder named /ESB. You can copy the 14 files loose, or copy esb.zip as it is. You can also put the zip in the card’s top folder as /ESB.ZIP.
  3. Start Empire Strikes Back from the Plugins page in the menu.

The files can have any names, because the plugin knows each ROM by its size and contents. If a ROM is missing, the screen names it. Only MAME’s esb set works.

Controls

On the ColecoVision controller:

  • The joystick moves the yoke. The yoke springs back when you let go.
  • Either fire button fires.
  • Keypad 1 adds a coin.
  • Keypad 2 starts the game. Fire starts it too.
  • Keypad 0 swaps up and down.
  • Press RESET on the console to go back to the menu.

On a USB pad, through a powered hub:

  • The left stick moves the yoke. The D-pad works too.
  • Any face button, L, R, ZL or ZR fires.
  • Minus adds a coin, and plus starts the game.
  • Click the right stick, or press the capture button, to swap up and down.

At first, up on the stick aims down, the way a flight stick works. The plugin remembers which way you left it.

About five seconds after the game starts, the stick does nothing for three seconds. The plugin is moving the yoke to both ends so the game can learn its range.

Saves

High scores and the game’s settings are saved in /ESB/ESB.NV when you press RESET. Press RESET before you turn the console off, or new high scores are lost.

Credits

Parts of this plugin are ports of MAME’s code, or were checked against it. That code is under the BSD-3-Clause license, and its authors are:

  • Steve Baines and Frank Palazzolo, for the Star Wars driver and the matrix processor.
  • Aaron Giles, for the slapstic chip.
  • Mathis Rosenhauer, for the vector generator, with thanks to Eric Smith, Brad Oliver, Bernd Wiebelt, Aaron Giles and Andrew Caldwell.
  • Frank Palazzolo, Aaron Giles, Jonathan Gevaryahu, Raphael Nabet, Couriersud and Michael Zapf, for the TMS5220 speech chip.
  • Curt Coder, smf, Barry Rodewald and Dirk Best, for the RIOT, X2212 and ADC0809 chips.
  • Nathan Woods, for the 6809 CPU.
  • Brad Oliver, Eric Smith and Juergen Buchmueller, for the POKEY sound chip.

You can find MAME at https://www.mamedev.org. The zip reader follows Mark Adler’s puff, from zlib. USB support comes from TinyUSB by Ha Thach, under the MIT license.

The plugin itself is by Parrot Cart, and it’s free. Its source is linked next to its download.

Star Wars and The Empire Strikes Back are trademarks of Lucasfilm Ltd. This plugin contains none of the game.

Build it yourself

You need the Raspberry Pi Pico SDK 2.1.1, an Arm GNU toolchain, CMake, Ninja, Python 3, sjasmplus and picotool. Releases are built with the Arm GNU Toolchain 9-2019-q4 (GCC 9.2.1) and picotool 2.3.1. With those you get the same file, byte for byte.

cmake -B build -G Ninja -DPICO_SDK_PATH=$HOME/pico-sdk
ninja -C build

This makes build/ESB.CVP. Copy it into the /PLUGINS folder on the card.

On Ubuntu, tools/ci/setup.sh installs the same tools that GitHub uses to build each release.

CART-README.md is the text the cart shows on the plugin’s page. It is the start of this README.

License

The plugin is under the BSD 3-Clause license (LICENSE). THIRD-PARTY.md lists the parts that came from elsewhere, and their licenses.

Release details

We read these from GitHub when the plugin was listed.

Release
v0.1.4, 2026-11-18
Image
195,840 bytes, loaded into RAM
Plugin API
1
GitHub
plasticbugs/parrot-plugin-esb
Source
Code at v0.1.4
License
BSD 3-Clause "New" or "Revised" License
Credits
Parts of this plugin are ports of MAME’s code, or were checked against it. That code is under the BSD-3-Clause license, and its authors are:; Steve Baines and Frank Palazzolo, for the Star Wars driver and the matrix processor.; Aaron Giles, for the slapstic chip.; Mathis Rosenhauer, for the vector…
SHA-256
9f00b0d466cf43d00f7809a9d30cdefb7634d949477b6d689334adfd1ca5ce62

Release notes

The newest version is first.

  • 0.1.4

    2026-11-18, v0.1.4

    Fixes the glitches on the console. The cart now reads the console’s address lines twice before it answers.

Put it on your cart

  1. Download ESB.CVP

    The SHA-256 is above if you want to check the file.

  2. Copy it to /PLUGINS

    That folder is on the cart’s microSD card.

  3. Start it

    Press B for Home, open Apps, pick Empire Strikes Back and press A.